The tenants at a property in Goldthorpe reported a draught around their front uPVC door. The door closed, but the locking mechanism wasn’t pulling the bottom of the door snugly against the frame. When I checked it, the lower hooks and rollers weren’t moving as they should.
Replacing the failed Yale gearbox
I removed the multipoint locking mechanism and found that the Yale gearbox had failed. I fitted a genuine Yale replacement gearbox and refitted the existing lock strip. The lower hooks and rollers worked again, so I could keep the rest of the Yale multipoint lock in place.
Realigning the front door and servicing the rear door
I realigned the front door so it pulled evenly against the seals when locked. This addressed the gap where the tenants had been feeling the draught. While I was there, I also serviced the rear uPVC door as part of the same callout.
If your door closes but still lets in a draught, it’s worth checking both the locking mechanism and the door alignment. See my uPVC door repair service or get in touch through my Goldthorpe locksmith page.